Biodiversity AI Project Interview
One of our goals here at Ocean Builders is not to simply be eco-friendly, but to be eco-restorative meaning that we want to help restore the ecosystems in our oceans. One of the projects that we will use to track the progress of the biodiversity restoration that is happening around the SeaPod is our Biodiversity […]
Incinerator Controller
We are back with Omer to give an overview of how the incinerator and the heat exchanger will work together to dispose of the waste and generate hot water at the same time. This demo is a mockup to show how the different pieces of the system will operate. Usually, this process will happen when […]
3D Printed Coral Project Interview
Although our goal here at Ocean Builders is to build homes, our priorities lie in doing so in a sustainable and even restorative manner for our oceans. One of the biggest goals that we have is restoring existing coral reefs and promoting the growth of new corals, both around the physical SeaPod locations as well […]
Manta USV Project Interview
In addition to our UAV delivery drone, we are also working on a USV drone that will be able to transport goods between the SeaPod and land. USV stands for Unmanned Surface Vessel, which basically is a fully automated boat that uses artificial intelligence to drive itself where it needs to go. Here we have […]
UAV Drone Delivery Project Interview
Here we have an interview with Connor about the autonomous drone delivery project that we have been working on. This system will be autonomous and won’t require drone pilots, it will be operated by an artificial intelligence system that we are developing which will allow the constant learning of the area as well as patterns. […]
Lifeguard AI Project Interview
Here we have some video from an interview with Connor where he goes in-depth into what the capabilities of the Lifeguard AI system will be able to do. Of course, there are many things that we keep in mind when designing these homes from comfort to sustainability to eco-friendly and eco-efficiency, but we hold safety […]
Incinerator Toilet System Nearing Final Assembly
Here we have the first working prototype of the incinerator system that will be used in the SeaPod incinerator toilet. This prototype is essentially an R&D version that will be used to test the different processes that are involved in the system.This prototype was built at the manufacturing facility that we are partnering with and […]
EcoPod Introduction
Most of our readers are familiar with the SeaPod and the GreenPod by now, and if you have been following along closely to the blog then you may have noticed the “EcoPod” being referenced in a post or two. While most of our focus has been on the SeaPod development, we have been working on […]
Toilet Incinerator Overview
One of our goals was to have a “normal” toilet experience in the SeaPod while still being safe for the environment. Most toilets on boats or composting toilets don’t use water, you can’t flush toilet paper, or they use chemicals to decompose everything. We didn’t want something like this, and of course, we won’t just […]
UAV Update
Connor is back with another update on the delivery drone system that we will be using to make deliveries to and from the SeaPod. In the attached video he explains a bit of what the drones will do and how they will work.We start out by looking at a few commercially available drones that will […]
Special LED lighting
Here we have Omer giving us a demonstration of the LED light strips that we will be using in the SeaPod and the app that will control them. The entire lighting system required a ton of research and testing, but we have found an option that will work perfectly for us.Omer has two different LED light […]
EcoPod Test Assembly
Craig is here to give us an update on the test assembly of the EcoPod. In the attached video he walks us through where we are in the process and what we will be doing as we move along. As you can see, we are hard at work here at the factory and making some […]
EcoPod Roof Updates
We are at the Ocean Builders Factory here in Panama with another update from Craig about the new EcoPod roof design. We have recently made a plug and three molds so that we can begin making the roof sections.The roof will be made up of a ring of 28 of these sections that go around […]
Lighting Challenges
One of the unexpected challenges that we ran into during the development of the SeaPod was the lighting system. We ended up spending a ton of time researching LED lights to determine what the best options would be.LED light strips tend to have some pretty big tradeoffs when it comes to brightness, sharpness, and color […]
Greening The Factory
Grant Romundt Environmental solar power
Grant has a new update from the Ocean Builders Factory here in Panama. We are getting closer to going completely off-grid and being able to create 100% of the electricity that we will use.This update comes from the roof of the factory where we are installing some new solar panels that will generate electricity to […]
Factory Christmas Party
Ocean Builders had a Christmas Celebration with our factory workers at a local restaurant on Dec 24th. We celebrated a great year of progress in bringing SeaPods once step closer to reality. We also celebrated winning first place in the Radical Innovation Architectural Design Award this week. We also shared our excitement about the coming […]
Test Results
About two years ago, we launched a small scale model to act as a proof-of-concept for the idea for the TriPod base model of the SeaPod. The model performed wonderfully and we learned a ton from the experiment. We wanted to see some of the long-term effects that the bases would experience in the seawater. […]
Smart Bilge Pump Integration Complete
We are back with Omer for a demo of our smart bilge pump system. This system ensures that the water level in the bilge does not rise too far risking instability or even possibly sinking of the SeaPod.We have a differential pressure sensor that allows the system to constantly monitor the water level in the […]
Full Smart Shower Demo
Here we have a great demonstration of our full smart shower system from Omer. He walks us through each of the parts that all come together to deliver a convenient and relaxing shower experience. Omer has mocked up an easy-to-see example of how this system will work. Starting with the jet pump and controller. This […]
Aquascan Project Interview
Connor Firmender Technology
The Aquascan project that we are developing will be an incredibly valuable tool for us here at Ocean Builders as well as many other companies around the world. The goal of the Aquascan project is to create detailed maps of the seabed floor, starting in the areas where our SeaPods will be deployed, and then […]