Taking The TriPod Out For A Spin
Here we have some footage from our home marina here in Panama. We needed to move one of our TriPod bases to a different part of the marina so we used that as a chance to take it for a spin and see what it would be like in the open water. In the footage, […]
Walk-in Closet In The Master Bedroom
Here we have our CEO Grant walking us through the design of the walk-in closet that will be located in the master bedroom. One of the biggest challenges in building a floating home like the SeaPod is finding ways to be as efficient as possible with space. When we were reviewing the design of the […]
Mold Update
We are back at the Ocean Builders factory with another update on the progress of our molds. As you can see here, we have just successfully removed another subfloor section from the mold. Our employees are finishing up some polishing on the surface of the tooling gel coat which will be used again to make […]
Fail: Epoxy Master Mold Test
With many aspects of the SeaPod, we are pushing the envelope and challenging the old ways of doing things that have been done for decades. There has never been anything like the SeaPod ever built before so we are doing our own experimentation and testing of many different things through this process. That being said, […]
Safety Training
Reynaldo Howell Other, Safety Training
Everyone here at Ocean Builders works hard on the SeaPod project, and a lot of that work is potentially hazardous. As a company, we feel the responsibility to give our employees a safe working environment where we can minimize risks and hazards.One of the integral parts of maintaining a safe working environment is Reynaldo Howell, […]
Inserting The Tanks
Here you can see some of our employees working together at the marina to insert a ballast tank into one of the side spars of this SeaPod base. These fiberglass tanks have several internal chambers which can be filled with water or air to help balance or adjust the overall buoyancy of the SeaPod.We are […]
Cross Section Testing
Here we have an update on the construction of the subfloor for the SeaPod. The subfloor is made in sections that meet in the middle of the SeaPod like slices of pizza. Each section is made individually and then connected to the center column of the SeaPod. At the top of this structure, we will […]
Assembling A SeaPod Base
We have another update from the factory about the SeaPod base that we are currently building. We are beginning to connect the outrigger tubes to the center core. These sections weigh nearly one ton each so we have to use a crane to move them around. As the tube is lifted by the crane, we […]
Making Of The Bathroom Climbing Wall
Access to the roof of the SeaPod goes through the skylight that is located at the top of the shower. We could have easily used a regular ladder for this but we have done so much work to make the SeaPod unique so we felt that a ladder wouldn’t fit the theme of the home. […]
Using Open-Source Platforms For Home Automation
The SeaPod is a smart home that has dozens of automated processes that work together seamlessly. While the whole point of home automation is to make life in a smart home more convenient, it requires an immense amount of work to achieve that integration and operation that we need.When we originally started on this journey, […]
Making Of The Main Body
Before we can make our molds, we have to build the plug, which is what we call the positive mold. The plug is essentially the shape that we want the final product to be. So after the plug is built it is used to create the negative molds. The negative molds are what we use […]
Making The Windows In The SeaPod
When you look at the SeaPod, one of the striking features that you’ll notice is the huge panoramic windows that seem to wrap around the home. While these windows look stunning and provide wonderful views from the inside, they were quite a challenge to engineer.The original plan was to have one large window that would […]
The SeaPod Skylight
The round shower is located directly in the center of the top floor of the SeaPod. The shower has a diameter of 1.6 meters and also offers access to the roof using whichever style of the climbing wall that you choose. In addition to offering roof access, the skylight can also be opened to provide […]
Main Door Hatch Development Progress
This is an update on the hatch doors that will be at water level near the dock. This door is the main entrance to the SeaPod and it leads to the spiral staircase which takes you up the center spar and into the living room. This door is designed to be very strong and completely […]
Applying Tooling Gel Coat To The Plug
After all of the buffing, sanding, and polishing that we did on this piece, we were able to get it to the almost mirror finish that we are looking for. We checked it for deformities and we happily found none, so we can continue to the next steps of adding the coat of tooling gel and […]
Making Progress On The Molds At The Factory
We are back at the factory where work continues on the SeaPod molds. This is a long process that must be perfect so we are making sure to cover every step and make sure we are as close to perfect as we can be.In this video, you can see our employees working on one of […]
Implementing Curved Features In The SeaPod
The design of the SeaPod features many dramatic curves. While these curves are beautiful, unique, and bring a more natural flow of energy within the home, they also come with a significant challenge when it comes to construction. One of the difficulties with being unique is that there are many things that have never been […]
Factory Update For SeaPod Molds
We have an update from the factory regarding the production of our SeaPod molds. We are moving forward with the process of applying the tooling gel coat to the positive mold which will give us the surface of our negative mold.The process of adding the coat of tooling gel is very important. Tooling gel acts […]
New Ocean Builders Dry Bags
We have been working on some new products that we think will be great additions to the lifestyle of living in the water that you will get with the SeaPod. Here we have our CEO, Grant Romundt showing some examples of one of these products.Living in a SeaPod will bring constant contact with water, there […]
Removable Mold End Caps
Grant Romundt Construction
As we start to complete the process of making our molds, we can move into making the actual panels of the SeaPod. This video focuses on the molds for the subfloor sections which will support the floors inside the home. You can see two of our subfloor molds which after having some slight deformations, were […]