Today is the big day! It’s time to finally put the SeaPod Eco on the water. This is not an easy job and requires a bit of teamwork but that’s nothing new for the Ocean Builders crew. We only get one chance to do this right so we are going to take our time and […]
We have a quick update from Richard about the progress on our concrete dock. The crew is mixing all of the concrete by hand and then pouring and smoothing everything out. This concrete mix has four additives that provide different advantages over normal concrete so that it will last longer and be stronger. You can […]
Now that the sliding windows are installed, it’s time to get the flat patio windows installed on the EcoPod prototype. These windows will be the door that goes between the kitchen area and the back patio and they will slide open to create a large open-air room. This is the first time that we have […]
The crew has been working on getting the first of the EcoPod windows installed. We recently got the window frames installed and we couldn’t wait to get the first panes in place. These windows match the curvature of the home and slide open to provide fresh air, great views, and a very open feeling to […]
We are getting this TriPod base prepared for launch and we are coming down to the final steps to get everything good to go. One of the final steps is to prepare the Pod support rests. The actual Pod will slide over the top of this center spar and most of the weight will rest […]
We are getting down to the nitty-gritty on the floating spar. The painting continues! We have all of the protective paint and white paint applied and now the crew is finishing up the blue paint on the outriggers. We started with protective paint to prevent corrosion on the surface, but it doesn’t look great so […]
Grant has another factory update – the mold for the Wazebo seating area is almost ready to go! We built the plug and then used that to make this mold. Once this mold is ready, we can take it off of the plug and do the finishing work needed to get it finished. We can […]
Our big global launch event is coming up very soon and we are working hard to get everything ready. One of the recent accomplishments by our team was to get the spiral staircase inside of the center spar installed and painted. This spiral staircase will serve as the main entry point into the Pods. The […]
The time has come to get the spars on the TriPod base painted! As you can see in the video below, the steel looks rusty. This is just surface rust that is totally normal and doesn’t affect the structural integrity of the steel. It is unavoidable in the humid climate we are working in here […]
We have our 3D printer up and running and we are starting to produce coral habitats! This 3D printing project has been in the hands of Arianna and she has been doing a fantastic job. Using a 3D printer like this is a new experience for all of us but we are adapting well so […]
Grant is back at the factory with Craig who is working on the first rope bridge that we are making for the EcoPod. This bridge will go from the center dock on the floating tripod base to the solar array on the outer spar. The bridge itself is about 21’ long and uses stainless steel […]
We are finally starting to install the first windows into the EcoPod! This project has been more than a year in the making and we are very excited to reach this massive milestone. We finished up the ceilings and now it’s time to move on to the windows. The EcoPod is still on land so […]
Grant is back with a big update from the factory about the EcoPod. The ceilings are almost finished! Most of the ceilings are done and we just have a few small areas to wrap up. The crew has been working hard to get everything put together and we are making great progress! Having the ceiling […]
Efficiency is the name of the game when it comes to having a small off-grid home like the SeaPod. We want to minimize every bit of energy that we use so that we can keep things cheaper and less wasteful which will lead to the home being more eco-friendly. Having on-demand hot water is a […]
The front door has been quite the unexpected headache but we believe that this updated version will be what we need to get started on door production. We recently had another door built which was close but needed some revisions. The model that we had made had an issue with the window pane rubbing against […]
We are very passionate about the environment and building floating homes that are eco-restorative. One of the challenges of building a home at sea is figuring out what to do with the sewage. The easy thing would be just dumping it into the ocean, but that is absolutely not an option for us and we […]
Up until now, the interior of the SeaPod prototype has just had the inner surface from the mold process. Of course, we needed to add the interior walls and so far, that process has been moving along nicely. The SeaPod is curvy and these walls are no different. These walls are made of a honeycomb […]
Grant is here to give us a little update about the shower in the EcoPod. You can see in the video below that Grant is standing in the shower, or at least the area that will become the shower. We have the main walls up now so we can see the layout of how things […]
Connor Firmender Environmental
Connor and Arianna recently joined JC who is the Director of Reef2Reef Foundation at their protected marine park. At their marine park is a coral garden with hanging trees, Reefballs, and they are testing Mineral Accretion Technology with the support of Coralive. Arianna is our intern from Arizona State University, but the intern title does […]
Grant has always been a visionary. From a young age he caught onto new technology trends long before they became commonplace.
This fascination with technology began at a young age where he would build electronic circuits from scratch, disassembling and re-assembling household electronics and then at the age of 8 in 1980 he became the first and youngest student in Canada to compete in a science fair with a software program on an early home computer. His passion continued to propel him forward, leading him to be featured in the Globe and Mail newspaper as having the most advanced mobile paperless office in Canada in 1995 complete with being the first retail adopter of VoIP technology in the country.
Fueled by this entrepreneurial spirit, Grant found himself living in a San Francisco tech frat-house alongside one of PayPal’s co-founders. This connection sparked the creation of his own software development company, which boasted a prestigious clientele including billion-dollar giants like Wella Professionals, L’Oreal Professional, and a roster of other beauty industry brand leaders.
By 2016, Grant had outsourced his software company so we was effectively retired upon which he moved into a floating home in Toronto. After living there for 3 1/2 years he conceived a revolutionary idea: an eco-restorative floating smart home unlike anything the world had ever seen. His vision materialized on September 22nd, 2022, with the unveiling of the first model open to the public.
He is currently dedicated to pioneering the technology that will form the foundation of the world’s first floating city – a project that demands not only innovation, but the seamless integration, development, and iteration of groundbreaking technological solutions. Grant’s story is one of relentless pursuit, a testament to the power of imagination and the drive to transform futuristic concepts into tangible realities.
Omer is a dedicated entrepreneur, engineer, and designer with over 11 years of experience in Mechatronics and IT projects. He has been instrumental in designing and implementing the advanced technology that powers OceanBuilders homes. This includes the development of the comprehensive home automation system, electrical and power generation systems, water treatment solutions, lighting, showers and sinks, entertainment systems, security measures, air conditioning system, and all the home sensors such as the weather station and gesture control. Omer also designed the drones for delivering goods to the SeaPod and all the marine-grade electronics from scratch, including circuit board design and the manufacturing of all these electronics for each home.
In addition to his work with OceanBuilders, Omer is the founder of Shark Eye. Shark Eye specializes in video analysis for security and business statistics, as well as developing cutting-edge vehicular access systems that use cameras and AI to detect vehicle license plates, colors, and makes. These systems provide a more secure access solution compared to traditional tag-based systems.
Omer is also experienced in training large language models (LLMs) and neural networks for object detection, and he has worked extensively with thermal cameras. As a Mechatronics Engineer, his passion for innovation and optimization drives his continuous pursuit of creating groundbreaking products and solutions.
Reserve your home by joining our waiting list!
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
GENERAL
BEDROOM
BATHROOM
KITCHEN
LIVING ROOM
ENGINEERING ROOM
ROOF
SPAR/DOCK AREA
PATIO
3 half floors
2 residents | 2 overnight guests
35 ft long | 26.9 ft wide | 23 ft tall
833 ft² / 73 m² living space
7.5 ft above the waves
Up to 578.45 ft² total windows
1250 ft³ storage space
Spar & Foundation: Steel, concrete
1,400 liters water storage
Exterior: Fiberglass, gel coat, foam
We have designed the bedroom to be your window to the world with unparalleled panoramic views that may inspire you to stay in bed all day long.
231 ft² Living Space
51.7 ft² Total Window Size
The Living Room is a large space that you can fully customize to your liking. It can be a space for entertaining guests, a second bedroom, a gym, an office, or whatever your imagination desires.
178.6 ft² Living Space
167.9 ft² Total Window Size
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Start your search by typing your technical expertise or areas of interest (eg. Engineering, Marine Restoration, Coral, Software, Waste, etc).
We believe that we are in the early pioneering days of a revolutionary new way of living and that entirely new industries will be born as civilization starts expanding into the sea.
Find a project you are passionate about and get started in helping to change the world in real and achievable ways.
We are looking for passionate entrepreneurs, aquapreneurs, technology enthusiasts, electronics hackers, marine biologists and other people that are passionate about developing new products and services that civilization will need to live on the ocean. You can participate remotely or be part of our Blue Economy Incubator Residential Program where you will be surrounded with like minded people.
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Making a Dock – Part 2
Grant Romundt Construction
We are making some good progress on the dock and Grant is back to tell us a little bit about it. This dock is pretty big, at about 3×8 meters. The structure of the dock is concrete but the buoyancy comes from the core which will be mostly foam. We have a large steel mold […]