The SeaPod needed a way to have access to the roof from the inside of the home so we came to the conclusion that a roof hatch would be the best option. Since the SeaPod is designed using curves and circles, we decided to go with a circular roof hatch that is located directly in […]
The TriPod model has the option for different additions to the end of the outriggers like the Wazebo, a hot tub, or a spot to dock your boat. The problem is that the outriggers will be fully submerged so we need some sort of walkway to take you from the center spar to the outer […]
We recently acquired a new(to us) telehandler here at the factory. A telehandler is a piece of equipment that is sort of like a forklift combined with a boom lift. It can lift several tons of weight and has wheels so that we can not only lift but also move heavy materials or equipment around.This […]
We are developing our own home automation app that will be used to control and monitor the various systems within the home. This app will be like the control center to control the lights, temperature, appliances, music, blinds, door locks, and also be able to check the status of the many sensors that are part […]
The SeaPod has three main sections, the bottom, the roof, and the sides. These side sections are critical when it comes to securing the roof section and the bottom section to hold everything together. The sides are the last section to be installed so it can be a little bit tricky.Building this first SeaPod prototype […]
Here we have what we are calling the “digital twin” of our first delivery drone build. This digital rendering is an exact image of what the drones will look like, down to the millimeter. We can use this model to 3D print individual pieces and see how everything fits together.This is essentially what the finished […]
We have spent the last almost two years designing, building, and perfecting the prototype molds for the SeaPod. These are the molds that we have been using here at the factory to build the first prototype of the SeaPod. The prototype molds also acted as a form of research and development for our production molds […]
Grant is back to give us a walkthrough of the new user interface for the Pod Companion app which will be used to control everything inside the SeaPod, EcoPod, and GreenPod. The design that you see here is hopefully going to be pretty close to at least the launch version of the app. We want […]
We are back at the factory with some very exciting news, the roof has been raised! We got the first SeaPod roof lifted and placed on the center spar where it will be mounted. This process took quite a bit of work and cooperation but we are in good shape now. The roof has a […]
The steel tubes that we use to make the spars and outriggers begin their lives as a flat sheet of steel that is then rolled into a tube. This process gets things close but usually not perfect, so we have to go back and do a little work to get things where we need them […]
The marine environment is extremely harsh for things like electronics, and with us building a smart home that will float in the ocean, corrosion is one of our biggest enemies. We need our homes to stand the test of time so one of our biggest ongoing priorities is to find ways to protect the electronics […]
Grant is back at the factory with an update about what he calls the Super Bowl. This is the underside of the SeaPod roof section. This is made up of 16 sections that go together like pieces of a pie to give us one solid roof.The molds will always have slight imperfections and while we […]
This is a quick little tour of the inside of the SeaPod central hub. This is the main point of contact where the three outriggers will meet in the middle as well as where the vertical central spar will be connected. This central hub will support all of the weight of the home so it […]
The SeaPod door has been quite the journey thus far, but we finally have found a good footing and we are making progress toward having these doors in full production. Through vendor changes, design changes, and everything else that we have been battling, we think we have found what we are looking for. The default […]
The big metal tubes that we use for the construction of the central spar and the outriggers on our floating tripod base start out as a flat sheet of steel so they have to be rolled into a tube. We have this machine that does the rolling for us so that we can have a […]
Back in August 2021, we launched the first floating TriPod base and it has been in the water since then. Now that we have seen how the first one has responded to being in the water and how everything has held up and we are ready to get the second one rolling.We recently got our […]
The crew is hard at work here at the factory working on putting the final touches on the first SeaPod roof. We make the roof upside down so the bottom is already complete, but we recently flipped it over for the first time and now it’s time to get the exterior surface polished and ready […]
It’s time to flip the first SeaPod roof over to its normal position, an event that we are dubbing The Flippening. This task is challenging for several reasons and it took some teamwork to get it done, but in the end, we had a successful flip and learned some things to hopefully make the next […]
Grant is back at the factory with an update and demonstration of how we are building the wall sections for the EcoPod. These walls are sort of like a sandwich with layers of different materials that each have their own purpose.We start with a look at our molds. These start out as two halves, one […]
Grant has always been a visionary. From a young age he caught onto new technology trends long before they became commonplace.
This fascination with technology began at a young age where he would build electronic circuits from scratch, disassembling and re-assembling household electronics and then at the age of 8 in 1980 he became the first and youngest student in Canada to compete in a science fair with a software program on an early home computer. His passion continued to propel him forward, leading him to be featured in the Globe and Mail newspaper as having the most advanced mobile paperless office in Canada in 1995 complete with being the first retail adopter of VoIP technology in the country.
Fueled by this entrepreneurial spirit, Grant found himself living in a San Francisco tech frat-house alongside one of PayPal’s co-founders. This connection sparked the creation of his own software development company, which boasted a prestigious clientele including billion-dollar giants like Wella Professionals, L’Oreal Professional, and a roster of other beauty industry brand leaders.
By 2016, Grant had outsourced his software company so we was effectively retired upon which he moved into a floating home in Toronto. After living there for 3 1/2 years he conceived a revolutionary idea: an eco-restorative floating smart home unlike anything the world had ever seen. His vision materialized on September 22nd, 2022, with the unveiling of the first model open to the public.
He is currently dedicated to pioneering the technology that will form the foundation of the world’s first floating city – a project that demands not only innovation, but the seamless integration, development, and iteration of groundbreaking technological solutions. Grant’s story is one of relentless pursuit, a testament to the power of imagination and the drive to transform futuristic concepts into tangible realities.
Omer is a dedicated entrepreneur, engineer, and designer with over 11 years of experience in Mechatronics and IT projects. He has been instrumental in designing and implementing the advanced technology that powers OceanBuilders homes. This includes the development of the comprehensive home automation system, electrical and power generation systems, water treatment solutions, lighting, showers and sinks, entertainment systems, security measures, air conditioning system, and all the home sensors such as the weather station and gesture control. Omer also designed the drones for delivering goods to the SeaPod and all the marine-grade electronics from scratch, including circuit board design and the manufacturing of all these electronics for each home.
In addition to his work with OceanBuilders, Omer is the founder of Shark Eye. Shark Eye specializes in video analysis for security and business statistics, as well as developing cutting-edge vehicular access systems that use cameras and AI to detect vehicle license plates, colors, and makes. These systems provide a more secure access solution compared to traditional tag-based systems.
Omer is also experienced in training large language models (LLMs) and neural networks for object detection, and he has worked extensively with thermal cameras. As a Mechatronics Engineer, his passion for innovation and optimization drives his continuous pursuit of creating groundbreaking products and solutions.
Reserve your home by joining our waiting list!
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
GENERAL
BEDROOM
BATHROOM
KITCHEN
LIVING ROOM
ENGINEERING ROOM
ROOF
SPAR/DOCK AREA
PATIO
3 half floors
2 residents | 2 overnight guests
35 ft long | 26.9 ft wide | 23 ft tall
833 ft² / 73 m² living space
7.5 ft above the waves
Up to 578.45 ft² total windows
1250 ft³ storage space
Spar & Foundation: Steel, concrete
1,400 liters water storage
Exterior: Fiberglass, gel coat, foam
We have designed the bedroom to be your window to the world with unparalleled panoramic views that may inspire you to stay in bed all day long.
231 ft² Living Space
51.7 ft² Total Window Size
The Living Room is a large space that you can fully customize to your liking. It can be a space for entertaining guests, a second bedroom, a gym, an office, or whatever your imagination desires.
178.6 ft² Living Space
167.9 ft² Total Window Size
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Start your search by typing your technical expertise or areas of interest (eg. Engineering, Marine Restoration, Coral, Software, Waste, etc).
We believe that we are in the early pioneering days of a revolutionary new way of living and that entirely new industries will be born as civilization starts expanding into the sea.
Find a project you are passionate about and get started in helping to change the world in real and achievable ways.
We are looking for passionate entrepreneurs, aquapreneurs, technology enthusiasts, electronics hackers, marine biologists and other people that are passionate about developing new products and services that civilization will need to live on the ocean. You can participate remotely or be part of our Blue Economy Incubator Residential Program where you will be surrounded with like minded people.
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
EcoPod Roof Assembly Part One
Grant Romundt Construction
We are at the factory with an update on the EcoPod roof from Grant! We spent the day assembling the 28 roof sections to make this big donut which will be the outer edge of the EcoPod roof.We went with this design because we wanted to have a rain collection system that can catch the […]