EcoPod Exterior Walls
Now that the bottom section and the roof for the EcoPod are coming along nicely, it’s time for us to get to work on the interior and exterior walls of the home. Since the home is built to be a circle, the walls have a constant curvature that allows us to build identical sections and […]
R&D – Can we build a Bulletproof SeaPod?
We had the idea to see if it was possible to make a bulletproof Pod with exterior walls that are capable of stopping a bullet or other projectiles. Our plan was to substitute the sheets of fiberglass fabric that we typically use in our Pods for sheets of kevlar fabric. The construction process is basically […]
Bottom of SeaPod Half Finished
We have been hard at work and making steady progress on the bottom half of the SeaPod shell here at the Ocean Builders Factory in Panama. Craig is back to give us a quick explanation of the work that we have been doing. You can see in the video below that things are coming along […]
Unboxing Electric HydroFoil
Similar to our new electric surfboard, here we have Grant walking us through the details of our new electric hydrofoil which is somewhat similar to the surfboard, but has some notable differences.The surfboard simply moves across the surface of the water just like any normal watercraft. The hydrofoil is different because it has a fin […]
Curved EcoPod Windows
Here we have a quick update from the production facility that is building the windows for the EcoPod. One of the coolest things about the EcoPod is that it has windows going around nearly the entire home. Complemented by the large flat window on the opposite side, the home is built in a circle and […]
EcoPod Window Production Updates
We have an exciting update to bring you about the production of the windows for the EcoPod. The first set of flat windows that will separate the kitchen and living room area from the patio is finished and should be heading our way very soon.When closed, these windows will provide a beautiful view from the […]
Torching Steel
The main structure of the floating TriPod base that will keep the SeaPod and EcoPod afloat is made of large steel tubes that are cut and welded together to create one solid structure. These tubes start their lives as a flat sheet of steel before being rolled into the tubes that you can see us […]
ReefScan ROV Pool Testing Session #1
Here we have our new ROV in action. We’ve been really excited about this collaboration with QC, and after unboxing, we couldn’t wait to get to grips with the controls and give our little ROV a test-dive. Our team is testing the ROV in the pool in order to get familiar with the controls and […]
ReefScan ROV unboxing
It’s a beautiful day here, and we’re very excited to be unboxing our new ROV, or underwater drone. We feel especially thankful to QC, who have agreed to partner with us and have provided this ROV. Our plan is to build upon this and scale up to a fleet of ROVs that can be used […]
Making of the bottom half of the SeaPod
We are starting to make some real progress on the bottom half of the SeaPod outer shell. Grant is back at the factory to talk us through the plans for the process and what we will be working on for the next few weeks.He is standing at the side of the molds for the bottom […]
Unboxing Electric Surfboard
What’s the point of living on the water if you don’t take the time to enjoy it? Especially in a floating home like the SeaPod, you will have easy access to the sea for things like paddleboarding, kayaking, or swimming. For those who want to add a little bit of speed to their water activities, […]
Cutting Steel Disks for TriPod frames
We have a steel disk that creates a bit of a flange on the bottom of each hub on our floating TriPod bases. The hub is what we call the center spar where the three outriggers are welded together. This “caps off” the bottom of the hub and helps seal everything up while giving us […]
Preparing the Outer Spars
We have been making some strong progress on the second and third floating bases here at the factory. We are back with Grant to take a look at two of the outer spars that will eventually become part of those bases. These four-meter tall spars will be mounted to the end of the outriggers and […]
Smart Tablet Design
All of the Ocean Builders homes will be fully-equipped smart homes so we wanted to have a functional yet aesthetically pleasing way to control everything no matter where you are in your home. While you will be able to access the home automation app from your smartphone, these tablets will be mounted in different parts […]
EcoPod Engineering Room Layout
We are back with our Omer for an overview of the layout of the engineering room in the basement of the EcoPod. Omer designed this layout to fit all of the equipment that we will need to run the EcoPod. The ceiling in this basement is only 1.1 meters tall so everything had to be […]
Recycling Sandblasting Material
Sandblasting is a very important part of our production process here at the Ocean Builders factory in the ever-humid Panama. Our steel develops a layer of surface rust pretty quickly so we have to remove that layer of corrosion so that when we apply our surface protectant, it will be applied directly to bare steel […]
Self Connecting Platforms
One of the limiting factors of living on the water is that your space is much more limited on land. You don’t have a yard that your kids can play in or that you can host a party in because your “yard” is the ocean. While that is a limit in one aspect, it opens […]
Aerial Tour of the Factory
We wanted to use our drone to show you around and give a bit of an aerial tour of the Ocean Builders factory so that you can see how things are laid out and better visualize what you see in the blog posts from the factory. Our factory is located in Linton Bay, Panama so […]
Detailed Plans for EcoPod Layout for the Engineering Team
Here we have Grant giving us a pretty cool inside-look at something that hasn’t been shown to the public yet – the engineering CAD drawings and schematics for the EcoPod that our engineering team uses. This computer program allows us to look at each individual piece and move or hide them so that we can […]
Custom Circuit Boards
Omer Larrañaga Technology
In the process of developing the Ocean Builders homes, we are doing things that have never been done before and building technology that has never been used before. When you are doing something totally new, you often have to create what you need since there are typically no options sitting on the shelf at the […]