We are back at the factory with Grant for an update on a change that we have made to the design of the SeaPod core. The TriPod model has three outriggers, or side-spars, that extend from the center core to create the base. At the end of each of these outriggers are large ballast tanks […]
After about a month of work, the time has finally come to remove the SeaPod shell molds from the plug. This has been a long process but these molds will be what gives the SeaPod its shape so we had to get it right.These sections are considerably bigger than the molds for the bottom of […]
We truly think that the work that we are doing here at Ocean Builders will change the way the world looks at housing forever. With this idea being so unique, we felt that it was very important to document the process and keep everyone updated during every step. To help with the media side of […]
The floor of the SeaPod will be pieced together with custom-cut sections that are unique to each room. The panels are cut from large sheets of flooring and fit together almost like a puzzle. The design of these has taken quite a bit of work but the results have been good so far. The floorplan […]
We are back with another update from the Ocean Builders factory for some of the mold that we have been working on. We currently have two molds for the subfloor sections of the SeaPod. We have been refining these molds and now we are using them to produce a few more sections as a test […]
Work has been continuing on the master molds for the body of the SeaPod. We have been applying the fiberglass to every other section of the mold to every other section as we go around. Right now, the white surface of the positive mold and the red tooling gel surface on alternating sections make the […]
As we start to complete the process of making our molds, we can move into making the actual panels of the SeaPod. This video focuses on the molds for the subfloor sections which will support the floors inside the home. You can see two of our subfloor molds which after having some slight deformations, were […]
Here we have some footage from our home marina here in Panama. We needed to move one of our TriPod bases to a different part of the marina so we used that as a chance to take it for a spin and see what it would be like in the open water. In the footage, […]
Here we have our CEO Grant walking us through the design of the walk-in closet that will be located in the master bedroom. One of the biggest challenges in building a floating home like the SeaPod is finding ways to be as efficient as possible with space. When we were reviewing the design of the […]
With many aspects of the SeaPod, we are pushing the envelope and challenging the old ways of doing things that have been done for decades. There has never been anything like the SeaPod ever built before so we are doing our own experimentation and testing of many different things through this process. That being said, […]
Here you can see some of our employees working together at the marina to insert a ballast tank into one of the side spars of this SeaPod base. These fiberglass tanks have several internal chambers which can be filled with water or air to help balance or adjust the overall buoyancy of the SeaPod.We are […]
We have another update from the factory about the SeaPod base that we are currently building. We are beginning to connect the outrigger tubes to the center core. These sections weigh nearly one ton each so we have to use a crane to move them around. As the tube is lifted by the crane, we […]
Access to the roof of the SeaPod goes through the skylight that is located at the top of the shower. We could have easily used a regular ladder for this but we have done so much work to make the SeaPod unique so we felt that a ladder wouldn’t fit the theme of the home. […]
The SeaPod is a smart home that has dozens of automated processes that work together seamlessly. While the whole point of home automation is to make life in a smart home more convenient, it requires an immense amount of work to achieve that integration and operation that we need.When we originally started on this journey, […]
Before we can make our molds, we have to build the plug, which is what we call the positive mold. The plug is essentially the shape that we want the final product to be. So after the plug is built it is used to create the negative molds. The negative molds are what we use […]
When you look at the SeaPod, one of the striking features that you’ll notice is the huge panoramic windows that seem to wrap around the home. While these windows look stunning and provide wonderful views from the inside, they were quite a challenge to engineer.The original plan was to have one large window that would […]
The round shower is located directly in the center of the top floor of the SeaPod. The shower has a diameter of 1.6 meters and also offers access to the roof using whichever style of the climbing wall that you choose. In addition to offering roof access, the skylight can also be opened to provide […]
This is an update on the hatch doors that will be at water level near the dock. This door is the main entrance to the SeaPod and it leads to the spiral staircase which takes you up the center spar and into the living room. This door is designed to be very strong and completely […]
After all of the buffing, sanding, and polishing that we did on this piece, we were able to get it to the almost mirror finish that we are looking for. We checked it for deformities and we happily found none, so we can continue to the next steps of adding the coat of tooling gel and […]
Grant has always been a visionary. From a young age he caught onto new technology trends long before they became commonplace.
This fascination with technology began at a young age where he would build electronic circuits from scratch, disassembling and re-assembling household electronics and then at the age of 8 in 1980 he became the first and youngest student in Canada to compete in a science fair with a software program on an early home computer. His passion continued to propel him forward, leading him to be featured in the Globe and Mail newspaper as having the most advanced mobile paperless office in Canada in 1995 complete with being the first retail adopter of VoIP technology in the country.
Fueled by this entrepreneurial spirit, Grant found himself living in a San Francisco tech frat-house alongside one of PayPal’s co-founders. This connection sparked the creation of his own software development company, which boasted a prestigious clientele including billion-dollar giants like Wella Professionals, L’Oreal Professional, and a roster of other beauty industry brand leaders.
By 2016, Grant had outsourced his software company so we was effectively retired upon which he moved into a floating home in Toronto. After living there for 3 1/2 years he conceived a revolutionary idea: an eco-restorative floating smart home unlike anything the world had ever seen. His vision materialized on September 22nd, 2022, with the unveiling of the first model open to the public.
He is currently dedicated to pioneering the technology that will form the foundation of the world’s first floating city – a project that demands not only innovation, but the seamless integration, development, and iteration of groundbreaking technological solutions. Grant’s story is one of relentless pursuit, a testament to the power of imagination and the drive to transform futuristic concepts into tangible realities.
Omer is a dedicated entrepreneur, engineer, and designer with over 11 years of experience in Mechatronics and IT projects. He has been instrumental in designing and implementing the advanced technology that powers OceanBuilders homes. This includes the development of the comprehensive home automation system, electrical and power generation systems, water treatment solutions, lighting, showers and sinks, entertainment systems, security measures, air conditioning system, and all the home sensors such as the weather station and gesture control. Omer also designed the drones for delivering goods to the SeaPod and all the marine-grade electronics from scratch, including circuit board design and the manufacturing of all these electronics for each home.
In addition to his work with OceanBuilders, Omer is the founder of Shark Eye. Shark Eye specializes in video analysis for security and business statistics, as well as developing cutting-edge vehicular access systems that use cameras and AI to detect vehicle license plates, colors, and makes. These systems provide a more secure access solution compared to traditional tag-based systems.
Omer is also experienced in training large language models (LLMs) and neural networks for object detection, and he has worked extensively with thermal cameras. As a Mechatronics Engineer, his passion for innovation and optimization drives his continuous pursuit of creating groundbreaking products and solutions.
Reserve your home by joining our waiting list!
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
GENERAL
BEDROOM
BATHROOM
KITCHEN
LIVING ROOM
ENGINEERING ROOM
ROOF
SPAR/DOCK AREA
PATIO
3 half floors
2 residents | 2 overnight guests
35 ft long | 26.9 ft wide | 23 ft tall
833 ft² / 73 m² living space
7.5 ft above the waves
Up to 578.45 ft² total windows
1250 ft³ storage space
Spar & Foundation: Steel, concrete
1,400 liters water storage
Exterior: Fiberglass, gel coat, foam
We have designed the bedroom to be your window to the world with unparalleled panoramic views that may inspire you to stay in bed all day long.
231 ft² Living Space
51.7 ft² Total Window Size
The Living Room is a large space that you can fully customize to your liking. It can be a space for entertaining guests, a second bedroom, a gym, an office, or whatever your imagination desires.
178.6 ft² Living Space
167.9 ft² Total Window Size
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Start your search by typing your technical expertise or areas of interest (eg. Engineering, Marine Restoration, Coral, Software, Waste, etc).
We believe that we are in the early pioneering days of a revolutionary new way of living and that entirely new industries will be born as civilization starts expanding into the sea.
Find a project you are passionate about and get started in helping to change the world in real and achievable ways.
We are looking for passionate entrepreneurs, aquapreneurs, technology enthusiasts, electronics hackers, marine biologists and other people that are passionate about developing new products and services that civilization will need to live on the ocean. You can participate remotely or be part of our Blue Economy Incubator Residential Program where you will be surrounded with like minded people.
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Smart Shower & Sink Parts Have Arrived!
Grant Romundt Design
The SeaPod is a smart home that brings various aspects of the home to life. Nearly every part of the SeaPod has integrated technologies that take the normal everyday tasks that we do and bring them into the future. The bathroom is no exception to that. From the motorized pocket door to the textured floor […]