We recently acquired a new(to us) telehandler here at the factory. A telehandler is a piece of equipment that is sort of like a forklift combined with a boom lift. It can lift several tons of weight and has wheels so that we can not only lift but also move heavy materials or equipment around.This […]
The SeaPod has three main sections, the bottom, the roof, and the sides. These side sections are critical when it comes to securing the roof section and the bottom section to hold everything together. The sides are the last section to be installed so it can be a little bit tricky.Building this first SeaPod prototype […]
We have spent the last almost two years designing, building, and perfecting the prototype molds for the SeaPod. These are the molds that we have been using here at the factory to build the first prototype of the SeaPod. The prototype molds also acted as a form of research and development for our production molds […]
The first SeaPods and EcoPods that we will launch will be floating on our TriPod base. The outriggers will sit about a meter below the water but the entire structure will be floating. These homes don’t have a propulsion system so we have to use an anchor below each outrigger to keep them in place.These […]
We are back at the factory with some very exciting news, the roof has been raised! We got the first SeaPod roof lifted and placed on the center spar where it will be mounted. This process took quite a bit of work and cooperation but we are in good shape now. The roof has a […]
The steel tubes that we use to make the spars and outriggers begin their lives as a flat sheet of steel that is then rolled into a tube. This process gets things close but usually not perfect, so we have to go back and do a little work to get things where we need them […]
One of the challenges when working in the water is water pressure. Water pressure gets higher as you go deeper and can crush structures if they are not properly reinforced to sustain the pressure. Since we want to have the option of an underwater room, we need to be absolutely certain that the structure won’t […]
Grant is back at the factory with an update about what he calls the Super Bowl. This is the underside of the SeaPod roof section. This is made up of 16 sections that go together like pieces of a pie to give us one solid roof.The molds will always have slight imperfections and while we […]
This is a quick little tour of the inside of the SeaPod central hub. This is the main point of contact where the three outriggers will meet in the middle as well as where the vertical central spar will be connected. This central hub will support all of the weight of the home so it […]
The big metal tubes that we use for the construction of the central spar and the outriggers on our floating tripod base start out as a flat sheet of steel so they have to be rolled into a tube. We have this machine that does the rolling for us so that we can have a […]
Back in August 2021, we launched the first floating TriPod base and it has been in the water since then. Now that we have seen how the first one has responded to being in the water and how everything has held up and we are ready to get the second one rolling.We recently got our […]
The crew is hard at work here at the factory working on putting the final touches on the first SeaPod roof. We make the roof upside down so the bottom is already complete, but we recently flipped it over for the first time and now it’s time to get the exterior surface polished and ready […]
It’s time to flip the first SeaPod roof over to its normal position, an event that we are dubbing The Flippening. This task is challenging for several reasons and it took some teamwork to get it done, but in the end, we had a successful flip and learned some things to hopefully make the next […]
Grant is back at the factory with an update and demonstration of how we are building the wall sections for the EcoPod. These walls are sort of like a sandwich with layers of different materials that each have their own purpose.We start with a look at our molds. These start out as two halves, one […]
We use big steel tubes to build the structures of the center spars and the outriggers on the floating base. The thing about steel is that it comes in flat sheets, not tubes, so we have to make the tubes by rolling the sheets of steel into a tube shape.We have a machine that gradually […]
Grant is bringing us another factory update on the progress of the EcoPod. We have made a few EcoPod wall sections and we now have five of these sections installed on the first EcoPod prototype. These wall sections will go completely around the circumference of the circular EcoPod at a height of 800mm which is […]
We acquired two salvaged workboats a few months ago that we have been taking the time to restore and get sea-worthy again. The goal for these boats is to be used to transport SeaPods and EcoPods from the marina here in Linton Bay, Panama out to where they will be placed. Since the Pods don’t […]
Grant is here today to give us an update from the factory. We can see the mold for the bottom of the SeaPod, which will be assembled with the roof, and of particular importance in this video is the mold for the sides of the SeaPod. These side pieces are essential in that they connect […]
Now that the bottom section and the roof for the EcoPod are coming along nicely, it’s time for us to get to work on the interior and exterior walls of the home. Since the home is built to be a circle, the walls have a constant curvature that allows us to build identical sections and […]
Ready to experience the future of ocean living?
Grant has always been a visionary. From a young age he caught onto new technology trends long before they became commonplace.
This fascination with technology began at a young age where he would build electronic circuits from scratch, disassembling and re-assembling household electronics and then at the age of 8 in 1980 he became the first and youngest student in Canada to compete in a science fair with a software program on an early home computer. His passion continued to propel him forward, leading him to be featured in the Globe and Mail newspaper as having the most advanced mobile paperless office in Canada in 1995 complete with being the first retail adopter of VoIP technology in the country.
Fueled by this entrepreneurial spirit, Grant found himself living in a San Francisco tech frat-house alongside one of PayPal’s co-founders. This connection sparked the creation of his own software development company, which boasted a prestigious clientele including billion-dollar giants like Wella Professionals, L’Oreal Professional, and a roster of other beauty industry brand leaders.
By 2016, Grant had outsourced his software company so we was effectively retired upon which he moved into a floating home in Toronto. After living there for 3 1/2 years he conceived a revolutionary idea: an eco-restorative floating smart home unlike anything the world had ever seen. His vision materialized on September 22nd, 2022, with the unveiling of the first model open to the public.
He is currently dedicated to pioneering the technology that will form the foundation of the world’s first floating city – a project that demands not only innovation, but the seamless integration, development, and iteration of groundbreaking technological solutions. Grant’s story is one of relentless pursuit, a testament to the power of imagination and the drive to transform futuristic concepts into tangible realities.
Omer is a dedicated entrepreneur, engineer, and designer with over 11 years of experience in Mechatronics and IT projects. He has been instrumental in designing and implementing the advanced technology that powers OceanBuilders homes. This includes the development of the comprehensive home automation system, electrical and power generation systems, water treatment solutions, lighting, showers and sinks, entertainment systems, security measures, air conditioning system, and all the home sensors such as the weather station and gesture control. Omer also designed the drones for delivering goods to the SeaPod and all the marine-grade electronics from scratch, including circuit board design and the manufacturing of all these electronics for each home.
In addition to his work with OceanBuilders, Omer is the founder of Shark Eye. Shark Eye specializes in video analysis for security and business statistics, as well as developing cutting-edge vehicular access systems that use cameras and AI to detect vehicle license plates, colors, and makes. These systems provide a more secure access solution compared to traditional tag-based systems.
Omer is also experienced in training large language models (LLMs) and neural networks for object detection, and he has worked extensively with thermal cameras. As a Mechatronics Engineer, his passion for innovation and optimization drives his continuous pursuit of creating groundbreaking products and solutions.
Request your personalized quote today!
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
GENERAL
BEDROOM
BATHROOM
KITCHEN
LIVING ROOM
ENGINEERING ROOM
ROOF
SPAR/DOCK AREA
PATIO
3 half floors
2 residents | 2 overnight guests
35 ft long | 26.9 ft wide | 23 ft tall
833 ft² / 73 m² living space
7.5 ft above the waves
Up to 578.45 ft² total windows
1250 ft³ storage space
Spar & Foundation: Steel, concrete
1,400 liters water storage
Exterior: Fiberglass, gel coat, foam
We have designed the bedroom to be your window to the world with unparalleled panoramic views that may inspire you to stay in bed all day long.
231 ft² Living Space
51.7 ft² Total Window Size
The Living Room is a large space that you can fully customize to your liking. It can be a space for entertaining guests, a second bedroom, a gym, an office, or whatever your imagination desires.
178.6 ft² Living Space
167.9 ft² Total Window Size
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Start your search by typing your technical expertise or areas of interest (eg. Engineering, Marine Restoration, Coral, Software, Waste, etc).
We believe that we are in the early pioneering days of a revolutionary new way of living and that entirely new industries will be born as civilization starts expanding into the sea.
Find a project you are passionate about and get started in helping to change the world in real and achievable ways.
We are looking for passionate entrepreneurs, aquapreneurs, technology enthusiasts, electronics hackers, marine biologists and other people that are passionate about developing new products and services that civilization will need to live on the ocean. You can participate remotely or be part of our Blue Economy Incubator Residential Program where you will be surrounded with like minded people.
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Door Nearing Completion
Omer Larrañaga Construction
The first prototype “front” door of the SeaPod is nearing completion. This is the main door that will be installed on the center spar and will lead to the spiral staircase that will take you up the spar and into the Pod home.This door was a big challenge, but we are finally seeing the light […]