While Ocean Builders is advocating for minimalism as a way to embrace a more sustainable lifestyle, we all need storage! Thus, we are designing and building all the Pods cabinetry in-house to ensure the best fit.The tiny house movement is very popular around the world as a way to reduce our possessions, and our Pods […]
An important feature of every home is the flooring. We don’t often realize that because it is just there, but you know how we realize how important our toes are once we break them? That’s why we put so much care into installing the Pod’s flooring carefully. We had experience in installing this type of […]
Today is the big day! It’s time to finally put the SeaPod Eco on the water. This is not an easy job and requires a bit of teamwork but that’s nothing new for the Ocean Builders crew. We only get one chance to do this right so we are going to take our time and […]
Now that the sliding windows are installed, it’s time to get the flat patio windows installed on the EcoPod prototype. These windows will be the door that goes between the kitchen area and the back patio and they will slide open to create a large open-air room. This is the first time that we have […]
The crew has been working on getting the first of the EcoPod windows installed. We recently got the window frames installed and we couldn’t wait to get the first panes in place. These windows match the curvature of the home and slide open to provide fresh air, great views, and a very open feeling to […]
The EcoPod bathroom is coming along nicely and Grant is back at the factory to give us a quick update on the progress. We have put lots of thought into the design of every aspect of the home, including the bathroom and we think that the experience will be like no other.The bathroom sink area […]
Grant is back at the factory with Craig who is working on the first rope bridge that we are making for the EcoPod. This bridge will go from the center dock on the floating tripod base to the solar array on the outer spar. The bridge itself is about 21’ long and uses stainless steel […]
We are finally starting to install the first windows into the EcoPod! This project has been more than a year in the making and we are very excited to reach this massive milestone. We finished up the ceilings and now it’s time to move on to the windows. The EcoPod is still on land so […]
Grant is back with a big update from the factory about the EcoPod. The ceilings are almost finished! Most of the ceilings are done and we just have a few small areas to wrap up. The crew has been working hard to get everything put together and we are making great progress! Having the ceiling […]
Grant is here to give us a little update about the shower in the EcoPod. You can see in the video below that Grant is standing in the shower, or at least the area that will become the shower. We have the main walls up now so we can see the layout of how things […]
Grant is back with a quick update on the ceiling installation in the EcoPod. We now have four ceiling panels securely installed in the bedroom. This is somewhat of a slow and steady kind of process so it will take a week or so to get all of the panels installed.You can see in the […]
BIG NEWS!!! The first shipment of EcoPod windows and frames has arrived at the factory! This is a huge day for us as these windows have taken quite a lot of time and were a massive headache, but we have finally reached the light at the end of the tunnel.The truck arrived at the factory […]
The first ceiling panel has been installed in the EcoPod! We completed the ceiling support grid and have now moved on to getting the panels installed. This ceiling ended up being almost exactly three meters tall and we are very happy with how roomy and open everything feels. It will take us about a week […]
Now that the roof is in place, it is time to get working on the ceiling and everything that will go in between the roof and the ceiling. One crucial piece is the supports that will help hold the ceiling panels in place.We are making the supports in a grid pattern similar to what would […]
This outer ring for the EcoPod roof is made up of 28 smaller sections which are then put together into four pieces made up of seven sections each. These smaller sections are much easier to manufacture than a larger section so this process worked out pretty well. We assembled all of the pieces on the […]
Part 2 of our process to get the EcoPod roof put together went fairly smoothly with only a few expected difficulties. Installing these roof sections was not easy and they take quite a bit of work to get properly fitted together, but we got the job done at the end of the day. Placing this […]
This video shows the process of how we install the four quarter sections of the EcoPod roof. We made these four sections with a mold and finally started to put them into place. These pieces are large and cumbersome to deal with but with a bit of muscle and help from our telehandler, we were […]
As we move closer to getting the EcoPod prototype finished up, Grant wanted to share a bit of the process of installing the outer ring of the roof. This roof is made of 28 sections which are installed together to make a big donut shape. Once the outer ring is in place we will install […]
Most parts of our homes are built by using molds built from 3D printed designs to shape fiberglass panels that we will then fit together. Some pieces, however, use a different method. One example of that is the bathroom sink area of the EcoPod.The video below shows the process of how we are making the […]
Grant has always been a visionary. From a young age he caught onto new technology trends long before they became commonplace.
This fascination with technology began at a young age where he would build electronic circuits from scratch, disassembling and re-assembling household electronics and then at the age of 8 in 1980 he became the first and youngest student in Canada to compete in a science fair with a software program on an early home computer. His passion continued to propel him forward, leading him to be featured in the Globe and Mail newspaper as having the most advanced mobile paperless office in Canada in 1995 complete with being the first retail adopter of VoIP technology in the country.
Fueled by this entrepreneurial spirit, Grant found himself living in a San Francisco tech frat-house alongside one of PayPal’s co-founders. This connection sparked the creation of his own software development company, which boasted a prestigious clientele including billion-dollar giants like Wella Professionals, L’Oreal Professional, and a roster of other beauty industry brand leaders.
By 2016, Grant had outsourced his software company so we was effectively retired upon which he moved into a floating home in Toronto. After living there for 3 1/2 years he conceived a revolutionary idea: an eco-restorative floating smart home unlike anything the world had ever seen. His vision materialized on September 22nd, 2022, with the unveiling of the first model open to the public.
He is currently dedicated to pioneering the technology that will form the foundation of the world’s first floating city – a project that demands not only innovation, but the seamless integration, development, and iteration of groundbreaking technological solutions. Grant’s story is one of relentless pursuit, a testament to the power of imagination and the drive to transform futuristic concepts into tangible realities.
Omer is a dedicated entrepreneur, engineer, and designer with over 11 years of experience in Mechatronics and IT projects. He has been instrumental in designing and implementing the advanced technology that powers OceanBuilders homes. This includes the development of the comprehensive home automation system, electrical and power generation systems, water treatment solutions, lighting, showers and sinks, entertainment systems, security measures, air conditioning system, and all the home sensors such as the weather station and gesture control. Omer also designed the drones for delivering goods to the SeaPod and all the marine-grade electronics from scratch, including circuit board design and the manufacturing of all these electronics for each home.
In addition to his work with OceanBuilders, Omer is the founder of Shark Eye. Shark Eye specializes in video analysis for security and business statistics, as well as developing cutting-edge vehicular access systems that use cameras and AI to detect vehicle license plates, colors, and makes. These systems provide a more secure access solution compared to traditional tag-based systems.
Omer is also experienced in training large language models (LLMs) and neural networks for object detection, and he has worked extensively with thermal cameras. As a Mechatronics Engineer, his passion for innovation and optimization drives his continuous pursuit of creating groundbreaking products and solutions.
Reserve your home by joining our waiting list!
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
GENERAL
BEDROOM
BATHROOM
KITCHEN
LIVING ROOM
ENGINEERING ROOM
ROOF
SPAR/DOCK AREA
PATIO
3 half floors
2 residents | 2 overnight guests
35 ft long | 26.9 ft wide | 23 ft tall
833 ft² / 73 m² living space
7.5 ft above the waves
Up to 578.45 ft² total windows
1250 ft³ storage space
Spar & Foundation: Steel, concrete
1,400 liters water storage
Exterior: Fiberglass, gel coat, foam
We have designed the bedroom to be your window to the world with unparalleled panoramic views that may inspire you to stay in bed all day long.
231 ft² Living Space
51.7 ft² Total Window Size
The Living Room is a large space that you can fully customize to your liking. It can be a space for entertaining guests, a second bedroom, a gym, an office, or whatever your imagination desires.
178.6 ft² Living Space
167.9 ft² Total Window Size
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Start your search by typing your technical expertise or areas of interest (eg. Engineering, Marine Restoration, Coral, Software, Waste, etc).
We believe that we are in the early pioneering days of a revolutionary new way of living and that entirely new industries will be born as civilization starts expanding into the sea.
Find a project you are passionate about and get started in helping to change the world in real and achievable ways.
We are looking for passionate entrepreneurs, aquapreneurs, technology enthusiasts, electronics hackers, marine biologists and other people that are passionate about developing new products and services that civilization will need to live on the ocean. You can participate remotely or be part of our Blue Economy Incubator Residential Program where you will be surrounded with like minded people.
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Smart Ring Testing
Grant Romundt Technology
In a fairytale, you say ABRACADABRA, and magic happens. In our Pods, you have the NFC Ring Control! With the help of this ring, you have control of the smart home systems, appliances, and payment processes within a single convenient solution. At Ocean Builders, we love technology as much as we love sustainable living innovation. […]