Part 2 of our process to get the EcoPod roof put together went fairly smoothly with only a few expected difficulties. Installing these roof sections was not easy and they take quite a bit of work to get properly fitted together, but we got the job done at the end of the day. Placing this […]
This video shows the process of how we install the four quarter sections of the EcoPod roof. We made these four sections with a mold and finally started to put them into place. These pieces are large and cumbersome to deal with but with a bit of muscle and help from our telehandler, we were […]
Grant Romundt Construction underwater room
We have made some good progress since our last update on the underwater room windows. We have gone from designs to beginning to manufacture the actual window frames.These windows for the underwater room have to be incredibly strong to withstand the pressure of being underwater, and they have to be very precise to properly seal […]
This is a quick video to show how we are going about installing the second half of the kitchen/patio floor in our SeaPod prototype.We learned quite a bit after spending almost a full day installing the first half, so we attacked this one from a different direction. The first time involved a lot of manhandling […]
As we move closer to getting the EcoPod prototype finished up, Grant wanted to share a bit of the process of installing the outer ring of the roof. This roof is made of 28 sections which are installed together to make a big donut shape. Once the outer ring is in place we will install […]
We spent quite a long time producing the prototype molds for the SeaPod here at the factory, in fact, some parts took nearly two years to get right. These prototype molds are what we used to make the first prototype, but they won’t be what we use when the SeaPod goes into full production.We have […]
The EcoPod roof has multiple uses and features. The most obvious is that it is a roof, it protects the people inside from the sun and rain, just like any normal roof. This roof will also have a slight cone-shape that will act as a funnel to collect rainwater to be used within the home.Those […]
The SeaPod windows are just absolutely massive. They have been a massive challenge to manufacture but we finally have done what we started out to do three years ago. Now that we have found a company that has successfully manufactured the windows, we have to find a way to get them to the factory here […]
We have been working on the EcoPod roof for the past few weeks and we are now finishing up production on the final section of the inner disk. The video below shows the process that the crew has to do to release each section from the mold. These 1.3cm fiberglass sections have an extremely tight […]
We have been working on the second floating TriPod base for a few months and we are finally nearing the completion of it. Our first TriPod base has been in the water for some time now so we are excited to get the second one finished.You can see in the video below that all of […]
The SeaPod will have a large set of sliding doors that will open up what is basically a wall of glass between the kitchen and the patio area to turn the kitchen/dining area into an open-air room. We wanted to find a way to implement this to truly open up the space and let you […]
We are back at the factory for a quick update from Grant about the progress of the EcoPod roof. This will be a functional roof in a few different ways so we are really excited about it. The team has been making quick progress and it is starting to take shape.The roof is going to […]
When the SeaPod was originally designed, one of the things that Grant really pushed for was to have huge windows. One of the best things about living on the sea is having beautiful views, so without big windows to enjoy the views, what’s the point?It’s easy to say “Let’s have huge windows” and it is […]
The frame of the EcoPod is really coming along now. We have the top portions of the walls installed and now we can really see where the windows will be. This top wall section will be where the roof eventually will be mounted. The installation of the bottom section of the walls was successful so […]
Here at Ocean Builders we are always experimenting, testing, reiterating, and trying to do things better than before and find new ways to improve. We always know what we would like the outcome to be, so it is important to constantly do testing and experimenting to see if we are getting closer or further away […]
The time has come for the floor to be installed in the first SeaPod prototype. As with many aspects of the journey that we have gone on to bring these homes to life, it wasn’t easy and it took some time, thinking, and muscle to make it happen.You can see in the video below that […]
We are building our own delivery drone from the ground up so that means that we have to test everything as we go, there are no previous tests or a track record since we are custom building this drone.Since the SeaPods will be at sea, where there are usually steady or gusty winds, this drone […]
We have some big moves happening here at the factory. The shell of the SeaPod prototype is assembled and reinforced and is now ready to be moved outside. We are moving it outside so that we can take the prototype of the EcoPod from our “front yard” to the inside of the factory where it […]
We are planting the SeaPod seed here in Panama, but our eventual goal is to have SeaPod homes in every corner of the ocean, all around the world. Now, that is much easier said than done, and it means we will have to ship homes our factory being located in Panama, at least at first.Eventually […]
Ready to experience the future of ocean living?
Grant has always been a visionary. From a young age he caught onto new technology trends long before they became commonplace.
This fascination with technology began at a young age where he would build electronic circuits from scratch, disassembling and re-assembling household electronics and then at the age of 8 in 1980 he became the first and youngest student in Canada to compete in a science fair with a software program on an early home computer. His passion continued to propel him forward, leading him to be featured in the Globe and Mail newspaper as having the most advanced mobile paperless office in Canada in 1995 complete with being the first retail adopter of VoIP technology in the country.
Fueled by this entrepreneurial spirit, Grant found himself living in a San Francisco tech frat-house alongside one of PayPal’s co-founders. This connection sparked the creation of his own software development company, which boasted a prestigious clientele including billion-dollar giants like Wella Professionals, L’Oreal Professional, and a roster of other beauty industry brand leaders.
By 2016, Grant had outsourced his software company so we was effectively retired upon which he moved into a floating home in Toronto. After living there for 3 1/2 years he conceived a revolutionary idea: an eco-restorative floating smart home unlike anything the world had ever seen. His vision materialized on September 22nd, 2022, with the unveiling of the first model open to the public.
He is currently dedicated to pioneering the technology that will form the foundation of the world’s first floating city – a project that demands not only innovation, but the seamless integration, development, and iteration of groundbreaking technological solutions. Grant’s story is one of relentless pursuit, a testament to the power of imagination and the drive to transform futuristic concepts into tangible realities.
Omer is a dedicated entrepreneur, engineer, and designer with over 11 years of experience in Mechatronics and IT projects. He has been instrumental in designing and implementing the advanced technology that powers OceanBuilders homes. This includes the development of the comprehensive home automation system, electrical and power generation systems, water treatment solutions, lighting, showers and sinks, entertainment systems, security measures, air conditioning system, and all the home sensors such as the weather station and gesture control. Omer also designed the drones for delivering goods to the SeaPod and all the marine-grade electronics from scratch, including circuit board design and the manufacturing of all these electronics for each home.
In addition to his work with OceanBuilders, Omer is the founder of Shark Eye. Shark Eye specializes in video analysis for security and business statistics, as well as developing cutting-edge vehicular access systems that use cameras and AI to detect vehicle license plates, colors, and makes. These systems provide a more secure access solution compared to traditional tag-based systems.
Omer is also experienced in training large language models (LLMs) and neural networks for object detection, and he has worked extensively with thermal cameras. As a Mechatronics Engineer, his passion for innovation and optimization drives his continuous pursuit of creating groundbreaking products and solutions.
Request your personalized quote today!
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
GENERAL
BEDROOM
BATHROOM
KITCHEN
LIVING ROOM
ENGINEERING ROOM
ROOF
SPAR/DOCK AREA
PATIO
3 half floors
2 residents | 2 overnight guests
35 ft long | 26.9 ft wide | 23 ft tall
833 ft² / 73 m² living space
7.5 ft above the waves
Up to 578.45 ft² total windows
1250 ft³ storage space
Spar & Foundation: Steel, concrete
1,400 liters water storage
Exterior: Fiberglass, gel coat, foam
We have designed the bedroom to be your window to the world with unparalleled panoramic views that may inspire you to stay in bed all day long.
231 ft² Living Space
51.7 ft² Total Window Size
The Living Room is a large space that you can fully customize to your liking. It can be a space for entertaining guests, a second bedroom, a gym, an office, or whatever your imagination desires.
178.6 ft² Living Space
167.9 ft² Total Window Size
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Start your search by typing your technical expertise or areas of interest (eg. Engineering, Marine Restoration, Coral, Software, Waste, etc).
We believe that we are in the early pioneering days of a revolutionary new way of living and that entirely new industries will be born as civilization starts expanding into the sea.
Find a project you are passionate about and get started in helping to change the world in real and achievable ways.
We are looking for passionate entrepreneurs, aquapreneurs, technology enthusiasts, electronics hackers, marine biologists and other people that are passionate about developing new products and services that civilization will need to live on the ocean. You can participate remotely or be part of our Blue Economy Incubator Residential Program where you will be surrounded with like minded people.
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Fiberglass Sprayer Arm
Grant Romundt Construction
The crew have been building a large arm that we can use with our fiberglass spray gun to help make the process go faster. This arm will be great for spraying large areas during production.A good example of how this will help during production is when we have to make the huge “bowl” for the […]