August 2022

Grant is back at the factory with an update on the SeaPod prototype. The final floor section is going in! This last piece is part of the bedroom floor on the top level. Just like installing floors in a traditional home, the final piece is usually the hardest to get in and this was no…

We brought in the big guns to build the cabinets for our homes! These four guys arrived at the factory a few days ago and have been working like lightning so far. We felt that it was a good idea to bring in cabinet specialists who are masters of cabinetry so that we could have…

The EcoPod bathroom is coming along nicely and Grant is back at the factory to give us a quick update on the progress. We have put lots of thought into the design of every aspect of the home, including the bathroom and we think that the experience will be like no other.The bathroom sink area…

The time has come to get the spars on the TriPod base painted! As you can see in the video below, the steel looks rusty. This is just surface rust that is totally normal and doesn’t affect the structural integrity of the steel. It is unavoidable in the humid climate we are working in here…

Another day, another set of challenges to overcome, and another successful job done by the Ocean Builders crew. We got the hot tub lounge and the hot tub installed on the outer spar.This proved to be difficult for a few reasons. The first is that we are working several meters above the ground. So everything…

Grant and Richard did a bit of testing to show the benefits of the special concrete mix that we are using for the docks compared to a normal concrete mix. Our mix has four additives that have different benefits. It has fibers to hold everything together, a superplasticizer to add strength and reduce the water…

Now that we have installed the solar station platform on the outer spar, we are moving on to building the frame that will hold the solar panels. Everything is mounted on the outer spar so it will be out of the way and have full sunlight for most of the day.Solar power is a great…

Grant is back at the factory with Craig who is working on the first rope bridge that we are making for the EcoPod. This bridge will go from the center dock on the floating tripod base to the solar array on the outer spar. The bridge itself is about 21’ long and uses stainless steel…

We are finally starting to install the first windows into the EcoPod! This project has been more than a year in the making and we are very excited to reach this massive milestone. We finished up the ceilings and now it’s time to move on to the windows. The EcoPod is still on land so…

While the main intention for the SeaPod is to be a sustainable and eco-friendly floating home, there are other use cases for them. One of those options is to use a SeaPod as a floating cafe, restaurant, or bar.The main area will…

We have spent more than a year coming up with the design for the Wazebo(water+gazebo) and after plenty of edits and revisions, we have come to a final design that is going to be the perfect outdoor hangout spot.Having a great outdoor living space is so important when living in a tropical area with beautiful…

Now that we have the new hot tub area completed, it is time to do a test fit to see if we need to make any more adjustments for everything to fit. This circular piece that you see will be like a cushioned bench seat where you can relax and hang your feet over the…

We recently got a new piece of machinery here at the factory to help us clean the steel and get it ready to work with. This new Laser Steel Cleaning Machine is going to increase the speed of production and make life a whole lot easier for our steel department!Our factory is located in Panama…

We recently did the first test run with our new fiberglass spray gun and things went great. Now, it is time to put it to work to make a floor for the SeaPod. This was the first “real world” test of the spray gun and we are very happy with the results.Our old method of…

Grant is back with a big update from the factory about the EcoPod. The ceilings are almost finished! Most of the ceilings are done and we just have a few small areas to wrap up. The crew has been working hard to get everything put together and we are making great progress! Having the ceiling…

We are getting down to crunch time before our big online launch event and we still have lots to do! One thing that the crew has been working hard on is getting the Wazebo ready. We want to have the Wazebo installed and ready to go on our floating TriPod base for our launch so…

The front door has been quite the unexpected headache but we believe that this updated version will be what we need to get started on door production. We recently had another door built which was close but needed some revisions. The model that we had made had an issue with the window pane rubbing against…

Up until now, the interior of the SeaPod prototype has just had the inner surface from the mold process. Of course, we needed to add the interior walls and so far, that process has been moving along nicely. The SeaPod is curvy and these walls are no different. These walls are made of a honeycomb…

Grant is here to give us a little update about the shower in the EcoPod. You can see in the video below that Grant is standing in the shower, or at least the area that will become the shower. We have the main walls up now so we can see the layout of how things…

Grant is back at the factory with a quick update showing some of the process of attaching the platform dock to the outer spar. We have three outer spars that can be used for different things, this one will be used to mount the array of solar panels which will help generate clean energy for…

Now that we have installed all of the ceiling panels installed, it is time to go back and cut out the holes for things like the multi-room audio speakers and get a bit more wiring done.You can see in the video below some of what is happening in the bedroom. Grant is standing on the…

Grant is back with a quick video of the first test with our new fiberglass spray gun which is mounted on the fiberglass sprayer arm that we recently built. This new machine will increase the fiberglass portion of our construction process by as much as 10 times so we are very excited about it.We previously…

We have been making some serious progress on the ceiling panel installation in the EcoPod during these past few days. We are now coming to the point where we are down to the last couple of panels.The final panels are going up just next to the door that will take you from the spiral staircase…

The production of the first underwater window frame(link underwater window frame in production) has been completed. Omer is at the production facility to give us a quick overview of the three pieces.The frame was made into three pieces so that it could be bolted from both the interior and the exterior. An underwater room will…

Grant is back with a quick update on the ceiling installation in the EcoPod. We now have four ceiling panels securely installed in the bedroom. This is somewhat of a slow and steady kind of process so it will take a week or so to get all of the panels installed.You can see in the…

We finally got our clay 3D printer setup and made some test prints! This 3D printer will be used to print the coral habitats for our 3D Printed Coral project to help regrow coral reefs all around the world! These habitats will act as a safe place where we can plant coral polyps so that…

BIG NEWS!!! The first shipment of EcoPod windows and frames has arrived at the factory! This is a huge day for us as these windows have taken quite a lot of time and were a massive headache, but we have finally reached the light at the end of the tunnel.The truck arrived at the factory…

We have another quick factory update about the beginning of the process of building a new home for our steel department. The steel department does all of the steel work to build the floating TriPod bases, spars, and any other metal work that needs to be done. We started out with everyone working inside the…

The first ceiling panel has been installed in the EcoPod! We completed the ceiling support grid and have now moved on to getting the panels installed. This ceiling ended up being almost exactly three meters tall and we are very happy with how roomy and open everything feels. It will take us about a week…

After we finished protecting the center dock, it was time to get it installed on the center spar of our second floating TriPod base. We used our telehandler to lift the dock up and then like a giant game of ring toss, we had to get it around the center spar so that it could…

The front door for our homes will be located below the home on the center spar of the floating TriPod base. You will enter through the door and then walk up a spiral staircase which will take you right into the living area of the home. This is a quick video showing the process of…

Here is a quick video that shows how we protect the metal of the center dock from corrosion. This dock will go around one of the outer spars on the floating TriPod base. You can see two of these docks that are installed on our first floating TriPod base.The first step is to remove all…

We recently finished up the mold for the hot tub that will sit on one of the side spars of the floating TriPod base if you decide to add it. It is designed to have cushions around the edge to sit and then the hot tub itself will be in the middle. We won’t cover…

Now that the roof is in place, it is time to get working on the ceiling and everything that will go in between the roof and the ceiling. One crucial piece is the supports that will help hold the ceiling panels in place.We are making the supports in a grid pattern similar to what would…